PRC 2000/E The Benchtop Factory
PRC 2000/E - The Benchtop Factory. The thermal management center powers and controls three SensaTemp handpieces simultaneously for safe, rapid installation and removal of virtually all surface mount and thru-hole components. Tips sold separately
Features
- Universal SMT component installation and removal
- Self-Contained solder cream dispensing
- Multilayer repair capability
- Continuous automatic calibration
- Automatic tip offset compensation system
- Pik-Vac Component Handling Wand
Product Numbers
Specifications
Unit: |
PRC 2000 PRC 2000E |
Power Requirements: |
115VAC, 60Hz, 230VAC, 50/60Hz, 400 Watts maximum 365 Watts maximum |
Dimensions: |
175mm H x 350mm W x 230mm D 175mm H x 350mm W x 230mm D (6.9" H x 13.75" W x 9.25" D) (6.9" H x 13.75" W x 9.25" D) |
Weight: |
Approx. 13 Kg (30 lbs.) Approx. 13 Kg (30 lbs.) |
Handpiece Specs: |
|
Tip to ground resistance: |
2 ohms or less |
Temperature stability: |
± 1.1°C (± 2°F) at idle from set tip temp. |
Tip Temperature Range: |
38° to 482°C (100° to 900°F) nominal |
Vaccuum and Air Vacuum Rise Time: |
200ms average as measured by PACE Process Monitor |
Vaccuum: |
51 cm Hg. (20 in. Hg.) nominal |
Pressure: |
.48 Bar (7 p.s.i.) nominal at maximum setting |
Airflow: |
13 SLPM (0.46 SCFM) maximum |
|
